|
|
|
|
| |
 |
Home > > Install Notice for Digi Electronic Lock |
|
| |
| First of all,Thank you for using Digi brand electronic lock. Please pay attention to the following tips when installing the lock |
| |
 Firstly please judge and check the lock you bought is left handle or right handle. |
|
|
| |
Dig door hole: Please refer to the door hole sketch(proportion 1:1) strictly.In order to take good care of the door, you should dig the door carefully to guarantee the minimum destruction of the door. Meanwhile, if the door is with decorative bar, you should ponder to dig the door hole on the position of no destruction or minimum destruction to the decorative bar. |
|
|
| |
Please repare 4pcs of AA alkaline batteries(1.5V battery, total 6V). In order to make sure the lock can work normally, user must use the high quality battery to avoid any damage incurred by using bad quality batteries. |
|
|
| |
After the lock installation finished, please test it repeatedly. Also emphasized to check whether the lock will draw back and draw out flexible or not. If the deadbolt is drawn with a little resistance, please move the plate a little until the deadbolt is drawn flexible. |
|
|
| We wish you can use the lock conveniently and happily. If you encounter any unsettled problem, please feel free to contact your local supplier.After the installation finished, use the hammer to enlarge the bend of the strike plate, in order to ensure the lock normal use for years. |
|
|
|
|
